LED lamp with indoor and outdoor decoration and lighting contrast!

LED lamp belt refers to the LED assembly in FPC or PCB hard band, named for the LED lamp with a belt shaped like the same. LED lamp belt device is divided into indoor and outdoor equipment.
LED lights for indoor decoration, because there is no known different decoration products exposed to wind and rain, in the process, with the performance of different systems, so we must do it well. So the device is very simple. When the device can be directly torn off the surface of the 3M double-sided adhesive stickers, and then fixed in the light of the local needs of the device, according to the flat hand.

Because the field device will have the wind and rain, so it is often used in the card slot fixed way. The need to cut and join the local, approach and indoor equipment the same, just need other equipment waterproof glue, in order to stabilize the waterproof effect of the convergence point.

Typically, LED lights with the number of beads per meter is fixed. For example 1210 is the 60 lamp, the 5050 is the 30 lamp, the special is the 60 lights. If there are other special requirements, for example 50 meters per meter, which involves the need to modify the circuit. Because usually 3 LED, if it is 50 light, will become a group of the number is not enough, but if it becomes two LED a group of words, will increase the current limiting resistor, it will cause the waste of resources. So, when the LED lights with customized special requirements, we must pay attention to the number of beads are multiples of 3, so that it is not a waste of resources caused by voltage.